French manufactured, the RIB swivel plates are a very popular choice with campervan self-builders owing to their solid construction and smooth mechanism.
The swivel plates fit between the base and seat slider rails on normal seats and pivot on a centre location point. The swivels have European TUV safety approval and lock securely in place facing forward for driving.
Upon purchasing this item, your kit will include the swivel plate itself and bolts to fit standard seat boxes.
To rotate your seat:
Turn off the vehicle engine and release the handbrake temporarily
One the seat is facing the back of the vehicle, you can then re-engage the handbrake
If your seat has the capability to adjust up and down, you may need to adjust your seat higher to allow the seat to rotate freely without any catching.
On some vans, the plastic handbrake cover, rubs on the swivel seat and may need to be removed
Please note that this base will raise the seat by approximately 43mm
Fitting Diagram:
Single RIB Seat Swivel – Driver Boxer/Ducato X250 forVans 2006 onwards
Compatible with Citroen Relay/Jumper 2006+ (X250) | Peugeot Boxer 2006+ (X250) | Fiat Ducato 2006+ (X250)
Compatible with heated seats and airbags
Comes in either drivers or passenger’s side
The hole centres are 395 x 385mm, and the height is 27mm
All swivel plates are TUV approved and are also fully crash tested
This seat swivel is for a single seat swivel – passenger or drivers side
Shipped directly from the supplier within 3 working days.
All offshore and Scottish Highlands incur extra courier costs. Please find the postcodes below which are included within this:
Scottish Highlands / offshore deliveries additional charges will apply. The following postcodes incur additional charges:
Zone 3 - Scottish Highlands - Postcodes: AB10-16, AB21-25, AB30-56, AB99, DD8-11, G83 & 84, FK17-21, IV, HS, KA27-28, KW, PA20-50, PA60-80, PH4-44, PH49-50, ZE
Zone 4 - UK Offshore Islands - Postcodes: GY, IM, JE, TR21-25, PO30-41, BT
