Rigid solar panel kit with Victron Smartsolar
bluetooth compatable MPPT charge controller, 4 piece
mount kit and cabling. (5m Cable length)
Kit includes
115W or 175W Victron BlueSolar monocrystalline panel
5M Fused positive 4mm solar cable, labelled ready to have the controller and panel wired in.
5M Negative 4mm solar cable, labelled ready to have the controller and panel wired in.
10A Victron MPPT solar controller with bluetooth.
A Pair MC4 connectors to join to the panel.
mounting blocks (in white or black).
Cable entry gland (in white or black).
Charge controller
- Automatic load disconnect function.
- Bluetooth connectivity via the Victron connect app.
- Low carbon footprint energy production for your campervan.
- Programming, real-time data and historical display options.
- Great off-grid potential.
Single rigid solar panel install guide by Rayne Automotive
SmartSolar charge controller MPPT - Overview
RIGID solar panel kit with Victron Smart solar Bluetooth
All of these panels come with a 5-year warranty and a 25-year limited performance warranty. We package them without added plastic (except the tape) to post them to you. You can see the attached data sheet in the attachments tab above.
115W Victron rigid solar panel dimensions: 1015mm x 668mm x 30mm. Weight: 8Kg.
Compatible solar charge controllers: PWM, Victron BlueSolar 75/10, Victron SmartSolar 75/10, CTEK D250SE.
175W Victron rigid solar panel dimensions: 1485mm x 668mm x 30mm. Weight: 11Kg.
Compatible solar charge controllers: PWM, Victron BlueSolar 75/15, Victron SmartSolar 75/15, CTEK D250SE.
Made from an ABS plastic and available in either white or black. These mount kits fit snugly to the frame of the rigid solar panels, and can be screwed, glued or both to the panel and the roof. They raise the panel slightly to allow the air to flow under the panel cooling it for maximum efficiency.
We provide a 4 piece mount kit for the 115W panel and a 6 piece for the 175W and 215W.
The cable entry gland provides two waterproof cable glands and a box to sit over the hole you cut for your wires to come through the roof. This should be bonded down.
